Tianjin Mikim Technique Co., Ltd

 

During the working process, the feed enters the expander through the feeding system and is subjected to the high speed rotation of the screw and the high temperature and pressure environment, which exposes it to high temperature for a short time, and the starch in the feed is gelatinized, the protein is denatured, and the cellulose becomes more digestible. Next, after passing through the puffing chamber, the feed is rapidly expanded and formed into pellets under the action of the cutting device. Finally, a cooling device allows the feed to solidify, cool down and obtain the desired product.

 

 

 

Model	Motor Power(Kw)	Capacity(Kg/H)	Weight(Kg)	Dimensions(Mm)
125	3-4	80-100	70	800*300*750
150	3-4	150-200	85	800*300*800
210	7.5-11	250-300	180	850*350*910
260	15	500	280	1080*420*1040
300	18.5-22	900-1100	350	1250*550*1300
400	30	1500-2000	800	1500*610*1800
500	37	3000	1260	1700*700*1900

 

 

The processing of small granular expanded aquafeed has extremely strict requirements on the crushing fineness of raw materials. Theoretically speaking, when the crushing fineness of the raw material reaches 100% through 60 mesh sieve, it can guarantee that the puffer with a die hole of 1.0mm can produce normally. However, practice has shown that such a crushing fineness for production, extruder running for some time, the mold hole began to clog, the expansion coefficient of the particles will gradually become larger, while the expansion of the particles will become longer. When more holes are blocked, the cutter speed reaches the limit can not make the length of the expanded particles to meet the requirements, and ultimately can only choose to stop to clean up the mold.
In addition, special attention should be paid to the production of small particles of puffed feed, if the formula contains fluff, hair, skin, cotton raw materials and other raw materials containing special fibers that are not easy to meet the requirements of crushing, will bring a lot of unnecessary trouble to the production, and even can not be normal production. Because these fluffy, fibrous raw materials, although after sieving, even if it can be sifted, but inevitably, there will still be fluffy, fibrous aggregates caused by mold clogging or paste the phenomenon of the cutter, affecting the normal production of the situation occurs. 

 

 

 

 

 

Advantages of Fish feed pellet machine: 1. The fully automatic animal feed extruder is easy to use, simple to operate, and one machine is multi-purpose, so there is no need to worry about poor hygiene and insufficient production capacity. 2. Made of high-quality materials, it has a longer service life, reliable quality and higher efficiency. It is suitable for various scenarios such as: feed mills, pastures, dog farms, farms, zoos and other places. 3. Can make a variety of pet food such as: dog food, fish food, bird food, cat food and other food, can use corn meal, soybean meal to make pet food machine and bone meal extruded dog food and cat food and pet food.

 

 

 

In order to be able to a long time stable production, it is recommended that the formula does not contain fluff, wool, leather, cotton raw materials and other raw materials containing special fibers that are not easy to meet the crushing requirements, and the fineness of the raw materials crushed to reach 100% over 80 mesh sieve is better, the minimum should also be 98% and sieve on the largest particles of the material particle size should not be more than 0.3mm. raw materials in such a fineness to ensure that puffing machine for a long period of time under the stable production. At the same time, the raw material is crushed more fine, the appearance of puffed particles is also more smooth, beautiful.

 

 

 

1. Could I have prices of your products feed pellet machine ?

Welcome. Pls feel free to send us an email here. You will get our reply in 24 hours.

 

2. Can we customize our logo/website/company name on Feed pellet machine?

Yes, we offer OEM and ODM service.

 

3. Can I get a discount?

Yes, the more quantity, the better the price. Please contact us to get the best price.

 

4. Do you inspectthe finished products?

Yes, each step of production and finished products will be came out inspection by QC department before shipping.

 

5. Where are you? Can we go to China and visit your factory?

Yes, of course. We are in Henan, China. Welcome to our factory.

 

http://www.feedpelletline.com/