Tianjin Mikim Technique Co., Ltd

 

When in use, first start the machine and run for 1 minute-2 minutes, then add the raw materials slowly into the feeding port, about a handful of raw materials can be filled with the ring groove of the spiral shaft head, stop feeding, friction preheating. When the temperature of the head rises, the pressure in the chamber increases, and the nozzle starts to spit, then feed again. Because the chamber has not reached the normal temperature and pressure, the feeding volume should be gradually and slowly increased.
Feeding should be continuous and even, the material should be dry, otherwise it is easy to cause the spiral groove clogging.
When the spiral groove is found to be clogged, do not stop immediately, should stop feeding and then run for a while, until there is a burnt flavor before stopping. This can avoid the nozzle, spiral shaft sleeve bite.

 

Feed pellet extruder

 

Product	Fish feed extruder single screw extruder deasel engine floating fish feed extruder
Model	Screw Diameter	Feeding Power	Cutting Power
DF-40	40mm	0.4kw	0.4kw
DF-50	50mm	0.4kw	0.4kw
DF-90	90mm	0.4kw	1.5kw
DF-135	133mm	0.4kw	2.2kw
DF-160	155mm	0.75-1.1kw	3.0kw
DF-200	195mm	1.5kw	3.0-4.0kw

 

 

 

 

(1) High automatic degree, all machines just need 2 worker for operation.

(2) The fish feed pellet extruder has a wide range of raw materials. Not only grain flour, but also fresh meat and bones.

(3) Various sizes of fish feed could be processed just by changing the mold.

(4) Intelligent electric heating device is adopted which can improve the feed expansion rate.

(5) High temperature and high pressure cooking process can kill the salmonella and bacterial infections and also makes the fish feed easily to digest.

(6)The wet type fish feed pellet machine needs a boiler to make steam which can conduct steam to the conditioner and ripen the raw material in advance.

(7)The main components are made of special alloy materials after heat treatment and have a long service life.It can also be used as a pretreatment for raw materials in the production of vegetable oils and drinking wine.

 

Feed expanding machine is the feed through the spiral extrusion of the way to cook, the volume becomes larger, fully cooked, kill part of the harmful bacteria in the material, and produce a certain flavor, the feed floats on the water surface for 12 hours does not dissipate, the convenience of the fish to eat, to avoid the waste of feed, which is more economical, the fish ate, easy to digest, fattening fast.

 

Feed puffing machine should pay attention to the use of the problem
1, turn on the line, check the motor steering.
2, the material is powder, add water and mix well, the humidity should be about 20%.
3, start the host, in the main spiral feed inlet, add a bottle of water amount.
4, put the material into the hopper, start the feed switch, at first the feed speed must be slow, open the cutter, the cutter speed must be fast. After the belt is normally discharged, it can be adjusted at will.

 

Mikim Machinery is a high-tech enterprise integrating scientific research, design, manufacture, installation and commissioning, and after-sales service. 13 years have been dedicated to the design and production of the feed machinery industry, which has passed many certificates such as CE, ISO, etc. Now we are mainly engaged in two fields: biomass pellet machine production line (wood chip crusher-conveyor-dryer-conveyor-wood pellet machine) and extruder production line (mixer-extruder-pneumatic conveyor-pulveriser). ) and extruder production line (mixer-extruder-pneumatic conveyor-shredding system)

We produce high quality and low price equipment, exported to all over the world, enjoy a good reputation, and perfect after-sales service system can help customers solve all the problems.

 

 

 

 

http://www.feedpelletline.com/